Fitting instructions for block walls
Adhesive should be generously applied to both the panels and the surface they are being fixed to (approximately 5mm depth on each).
The panels should then be installed from the lowest row and fitted together along the length of the wall, by simply fitting into place using a rubber mallet. Before moving to the second row, it is important to check that the joints between the pieces are alternated to ensure they are not visible.
It there is a corner in the design, then that should be the starting point. It is vital to use a long cornered piece on the bottom row and then alternate between courses with short corner pieces as you move up the wall.
For heights above three metres, the use of a simple mechanical fixing system is recommended as outlined in the diagram below. As there is no grouting or finishing required and no additional maintenance, your natural stone wall can be ready in a fraction of the time it would take to build by traditional methods.
Visit
We Sell Stone. Com, Old Dublin Road, Roscrea, Co. Tipperary , Ireland.
(Sat. Nav.: 52° 57' 59"N 07° 47' 21" W)
Open 7 days
Monday to Friday: 9am-1pm & 2pm - 5pm
Saturday: 10am -2pm
Sunday: 1pm - 5pm
Bank Holiday Mondays: 1pm - 5pm
Call: +353 (0505) 31100
Fax: +353 (0505) 31647
You Tube Videos: